This is my Ariens 1032 snowblower. It’s been repowered with an 11hp Greyhound engine (Honda Clone) It has a powered chute an deflector. Operated by 12v automobile Power Seat screw motors. They are controlled by a 4 way joystick mounted on the right handle. The blower and impeller housings have been lined with stainless steel. Clearance between the impeller blades and housing has been reduced to 1/16″. Weld was added to the blade tips then ground down to reduce the clearance. The stock 2 3/4″ auger drive pulley was replaced with a larger 3 1/4″ pulley. The snow in the first video section was about three days old and somewhat compacted and dense. The depth was between 15 and 18″ deep. Some of it was plow roll off. The location is Grand Haven Mi. 2/23/11